Stripping ST40

www.store.karl-wetzel.com

Consumables (wire brushes):

outside ø broad inside ø Wire strength Article no.
40 25 10 0,10 5.084.32
40 25 10 0,12 5.084.33
40 25 10 0,15 5.084.34
40 25 10 0,20 5.084.35
40 25 10 0,25 5.084.36
40 25 10 0,30 5.084.37
40 25 10 0,40 5.084.38
SKU: 5.086.30 Category:

Description

The ST40D stripping machine is used to strip enamelled round wires and flat copper. The wire is stripped between two rotating brushes. The distance between the brushes can be infinitely adjusted.

The ST40D stripping machine is fixed in a stationary position.

The ST40D stripping machine is suitable for thick round and flat wires. Parallel brushes do not cause any tensile forces on the wire.

Insert the enameled wire, turn it 90 degrees, pull it out, done. By inserting the wire from the side, the insulation can also be stripped in the middle of the wire (tapping).

With different brushes, the stripping quality can be adapted and optimized to the wire diameter and insulation material.

Technical specifications:

wire dimension: 1.5 to 8.0mm
wire cross-section: Round and square
Diameter of the brushes: 40mm
Electrical connection: Three-phase current 230/400 V, 50 Hz
Weight: 11.5kg
Article no.: 5.086.30