Strip HQ30/35

www.store.karl-wetzel.com

Consumables (wire brushes):

Wire brushes for HQ 30:

outside ø broad inside ø Wire strength Article no.
30 20 6 0,06 5.084.11
30 20 6 0,08 5.084.12
30 20 6 0,10 5.084.13
30 20 6 0,12 5.084.14
30 20 6 0,15 5.084.15
30 20 6 0,20 5.084.16
30 20 6 0,25 5.084.17
30 20 6 0,30 5.084.18

Wire brushes for HQ 35 P:

outside ø broad inside ø Wire strength Article no.
35 20 6 0,10 5.084.390
35 20 6 0,15 5.084.391
35 20 6 0,20 5.084.392
35 20 6 0,25 5.084.393
35 20 6 0,30 5.084.394
SKU: N/A Category:

Description

The HQ30 and HQ35P stripping machines are used to strip enamelled round wires and flat copper. The wire is stripped between two rotating brushes. The distance between the brushes can be infinitely adjusted.

The stripping machines HQ30 and HQ35P are guided by hand.

The HQ30 stripping machine is particularly suitable for thinner wires. The wire is drawn into the machine by counter-rotating brushes. The stripping machine HQ35P is suitable for thick round and flat wires. Parallel brushes do not cause any tensile forces on the wire.

Insert the enameled wire, turn it 90 degrees, pull it out, done. By inserting the wire from the side, the insulation can also be stripped in the middle of the wire (tapping).

With different brushes, the stripping quality can be adapted and optimized to the wire diameter and insulation material.

Technical specifications:

machine HQ30 HQ35P
wire dimension: 0.15 to 3.0mm 1.0 to 6.0mm
wire cross-section: Around Round and square
Diameter of the brushes: 30mm 35mm
Electrical connection: 230V; 50Hz 230V; 50Hz
Weight: 2.1kg 2.4kg
Article no.: 5.084.10 5.084.20

Additional information

Execution:

HQ 30, HQ 35P