Clamping ring TYPE D
www.store.karl-wetzel.com
Here is our product flyer: Page 1 | Page 2
Manual execution:
| Size: | D-700M | D-1000M | D-1200M | D-1400M | D-1800M |
| Ring: | 700mm | 1000mm | 1200 mm | 1400mm | 1800mm |
| Loading: | 500kg | 750kg | 1000kg | 1000kg | 1000kg |
| Article: | 4.080.10 | 4.080.20 | 4.080.25 | 4.080.30 | 4.080.40 |
Electrical design:
| Size: | D-500E | D-700E | D-1000E | D-1200E | D-1400E | D-1800E |
| Ring: | 500mm | 700mm | 1000mm | 1200 mm | 1400mm | 1800mm |
| Loading: | 500kg | 500kg | 750kg | 1000kg | 1000kg | 1200kg |
| Article: | 4.082.05 | 4.082.10 | 4.082.20 | 4.082.25 | 4.082.30 | 4.082.40 |
Reinforced E version:
| Size: | D-700E+ | D-1000E+ | D-1400E+ | D-1800E+ |
| Ring: | 700 mm | 1000 mm | 1400 mm | 1800 mm |
| Loading: | 1500 kg | 3000 kg | 4000 kg | 5000 kg |
| Article: | 4.082.10.S | 4.082.20.S | 4.082.30.S | 4.082.40.S |
Description
The “D” clamping ring is specially designed for clamping large stands. The base is rotatable on a table with a lifting device so that the heavy stand can be easily rotated around its own axis. The ring, which rotates 360 degrees, is guided and mounted on rollers. By using the ring, it is possible to operate medium-sized stands with one worker, since no help is required to turn and rotate the stand. With large stands, it is possible to hold the stand in any desired position.
The clamping rings are available in three versions: manual, electric, and reinforced electric.
Here is our product flyer: Page 1 | Page 2
Manual standard equipment:
- support plate
- 2 clamping straps with 1 pressure screw each
- Clamping device for ring
- Standard paintwork: blue / yellow
Electrical standard equipment:
- Voltage: 400V 50Hz
- support plate
- 2 clamping straps with 1 pressure screw each, from D-1400: 2 pressure screws
- Standard paintwork: blue / yellow
Reinforced standard electrical equipment:
- Voltage: 400V 50Hz
- 4 clamping straps with 2 pressure screws each
- Standard paintwork: blue / yellow
