www.store.karl-wetzel.com
| Induction heater JE-2 | |
| Length: | 270mm |
| Broad: | 200mm |
| Height: | 250mm |
| Electrical connection: | 230V; 16A |
| Article no. without accessories: | 9.260.15 |
| designation | Article no. |
| Support bar: 8 x 6 x 240 mm | 9.260.20 |
| Support bar: 10 x 10 x 240 mm | 9.260.22 |
| Support bar: 14 x 14 x 240 mm | 9.260.23 |
| Support bar: 20 x 20 x 240 mm | 9.260.24 |
| Support bar: 17 x 17 x 240 mm | 9.260.25 |
| Support bar: 25 x 25 x 240 mm | 9.260.26 |
| Support bar: 30 x 30 x 240 mm | 9.260.28 |
| Support bar: 40 x 40 x 240 mm | 9.260.30 |
| Support bar: 50 x 50 x 240 mm | 9.260.32 |
| 1 pair pole extension: 50 x 50 x 120 mm | 9.260.33 |
| 1 pair pole extension: 50 x 50 x 60 mm | 9.260.35 |
In addition, a thermal temperature controller can be connected, which can be set from 0 – 300 °C. Other thermal temperature controller options include a 0.3 to 5.0 min timer. and a degaussing device.
| designation | Article no. |
| Thermal temperature controller 0 – 300 C | 9.260.50 |
| Timer 0.3 – 5.0 min. | 9.260.40 |
| degaussing device | 9.260.60 |
Consisting of:
| Induction heater JE 2 | 9.260.15 |
| Support bar: 8 x 6 x 240 mm | 9.260.20 |
| Support bar: 10 x 10 x 240 mm | 9.260.22 |
| Support bar: 20 x 20 x 240 mm | 9.260.24 |
| Support bar: 25 x 25 x 240 mm | 9.260.26 |
| Support bar: 30 x 30 x 240 mm | 9.260.28 |
| Support bar: 40 x 40 x 240 mm | 9.260.30 |
| Thermal temperature controller 0 – 300 C | 9.260.50 |
| Timer 0.3 – 5.0 min. | 9.260.40 |
| degaussing device | 9.260.60 |
With the induction heater JE-2, all metal parts can be heated efficiently, evenly and cleanly for shrinking.
The parts to be heated are pushed onto the appropriate support bar and placed on the poles of the magnet yoke.
The heating time for a ball bearing, eg 6209, is approx. 1 minute. Since the scaffolding and the support slats remain cold, the risk of injury is minimized as far as possible.
